Mazda 2002 626 Owner'S Manual Download Page 153

Page: 153 / 250

6-37

Interior Comfort

Form No. 8Q50-EA-01G

Interior Equipment

▼

Overhead light

▼

Illuminated Entry System

When the switch is in the DOOR position,
the interior light comes on for:

•

about 30 seconds after the driver’s door
is unlocked by the transmitter or the
door lock switch and the ignition key is
removed.

•

about 15 seconds after all doors are
closed.

•

about 15 seconds after the key is
removed from the ignition.

The light also goes out when:

•

the ignition switch is turned to the ON
position and all doors are closed.

•

the door is lockedby the transmitter or
the door lock switch .

▼

Map Lights

The map lights are switched on or off by
pressing the switches.

Interior Lights

OFF

Light off

DOOR

Light on when any

door is open

Light on

OFF

DOOR

NOTE

If any door is left opened, the light
goes out after about 5 minutes.

Map light

With sunroof

Map light

Without sunroof

J94S.book Page 37 Saturday, June 23, 2001 1:04 PM

Summary of Contents for 2002 626



























































































































































































































































Search results

Summary of Contents for 2002 626

Reviews:

Related manuals for 2002 626

Brands by name

Popular brands

Mazda 2002 626, Owner'S Manual

Search results

Summary of Contents for 2002 626

Reviews:

Related manuals for 2002 626

Brands by name

Popular brands