Mazda 2002 626 Owner'S Manual Download Page 175

Page: 175 / 250

7-15

In Case of an Emergency

Form No. 8Q50-EA-01G

Emergency Towing

We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.

Proper lifting and towing are necessary to
prevent damage to the vehicle.
Government and local laws must be
followed.

A towed vehicle usually should have its
front wheels off the ground. If excessive
damage or other conditions prevent this,
use wheel dollies.

When towing with the rear wheels on the
ground, release the parking brake.

Towing Description

Wheel dollies

Don’t tow the vehicle pointed
backward with driving wheels on the
ground. This may cause internal
damage to the transaxle.

Don’t tow with sling-type equipment.
This could damage your vehicle. Use
wheel-lift or flatbed equipment.

CAUTION

J94S.book Page 15 Saturday, June 23, 2001 1:04 PM

Summary of Contents for 2002 626



























































































































































































































































Search results

Summary of Contents for 2002 626

Reviews:

Related manuals for 2002 626

Brands by name

Popular brands

Mazda 2002 626, Owner'S Manual

Search results

Summary of Contents for 2002 626

Reviews:

Related manuals for 2002 626

Brands by name

Popular brands