2
4280159 Rev. A 10/10
ELECTRICAL SYSTEM GENERAL PROCEDURES
0
C
onnector diagrams
Connector diagrams show connectors on the harness
side. The terminal indicates the view from the harness
side.
(Example)
Unused terminals are indicated by
∗
.
Connector on harness side
View from harness side
D
isconnecting
C
onnectors
When disconnecting connector, grasp the connectors,
not the wires.
NO GOO D
L
ocking
C
onnector
When locking connectors, listen for a click indicating
they are securely locked.
W
ire color code
Two-color wires are indicated by a two-letter
symbol.The first indicates the base color of the
wire, the second the color of the stripe.
For example:
W/R is a white wire with a red strip
BR/Y is a brown wire with a yellow strip
Symbol
(Example)
Solid color wire
Striped wire
B
W/R
White
(base color)
Red(stripe)
Black
IDC Wire Tap Procedure
Place IDC on vehicle
wire.
Close side of IDC.
Insert remote start
wire into IDC.
Crimp IDC metal tab
over both wires until
flush with top of IDC.
Close top of IDC.
NO GOOD
