11
4280159 Rev. A 10/10
KEY-IN-SENSE & PUSH WIRE ROUTING
1. Route the remote start harness YELLOW/BLUE and BROWN/BLACK wires along with the im-
mobilizer interface ribbon cable behind the vehicle’s steering column harness to protect the
wires from any potential damage from the steering column cover and tilt and telescopic steer-
ing wheel mechanism. (FIGURE Z)
2. Using (2) supplied, short wire ties, secure the remote start harness wires to the vehicle’s har-
ness. (FIGURE Z)
CAUTION:
EXTREME CARE MUST BE TAKEN TO ROUTE THE REMOTE START HARNESS
AWAY FROM THE STEERING COLUMN ADJUSTER SPRING.
WIRE HARNESS CONNECTIONS - STEERING COLUMN, continued
8
!
FIGURE Z
Wire Tie
Wire Tie
Ignition
Switch
Ignition
Connector
CAUTION: FAILURE TO ROUTE THE REMOTE START HARNESS WIRES PROPERLY COULD
RESULT IN DAMAGE TO THE WIRES DURING RE-ASSEMBLY. IF THE YELLOW/BLUE OR
BROWN/BLACK WIRES ARE SHORTED TO GROUND, THE SMART-KEY SUBSET WILL GET
DAMAGED AND NEED TO BE REPLACED.
!
Lower Steering Column
Cover Screw Hole
