Fig. 5-2
2. Route harness from mirror to headliner.
a) Route mirror harness into groove of wire
cover and attach wire cover to mirror base.
(Fig. 5-2)
b) Slide upper portion of wire cover up to headliner
so the “forks” are held by the headliner.
(Fig. 5-2)
3. Route harness to passenger-side A-pillar.
a) Route power harness between vehicle headliner
and roof to top of passenger-side A-pillar area.
(Fig. 5-3)
b) Tear one (1) piece of foam tape in half.
c) Secure power harness at top of A-pillar with
one-half (1/2) piece of foam tape.
(Fig. 5-3)
4. Route harness down passenger-side A-pillar.
a) Using fiberstick, disengage plastic clips on
A-pillar.
(Fig. 5-4)
b) Route harness in plastic clips, down to base
of A-pillar.
c) Re-fasten all plastic clips.
d) Secure power harness at base of A-pillar with
one-half (1/2) piece of foam tape.
(Fig. 5-4)
e) Route power harness down through
dash and into fuse-box area.
(Fig. 5-5)
Fig. 5-3
½ Foam
Tape
CAUTION
!
Fig. 5-4
½ Foam
Tape
CAUTION
!
Verify mirror harness path is clear of air bag (if equipped).
Fig. 5-5
Page 10 of 13
Revision A
550-0339
