11
Turn cycle knob to choose your wash cycle.
8.
Select cycle
9.
Select Temperature
Once you select a cycle, select the wash temperature by
touching the Temperature button to the desired setting. Even
for cold wash settings, some warm water may be added to the
washer to maintain a minimum temperature.
NOTE:
Always read and follow fabric care label instructions to
avoid damage to your items. If not sure on which temperature to
use, refer to the chart below or select a cooler temperature.
12.
Select cycle options, if desired
If you would like to add an Extra Rinse and/or Oxi option, touch
the button for that feature.
14.
Touch and hold START/PAUSE
button to begin wash cycle
Touch and hold START/PAUSE button for up to 3 seconds to
start the wash cycle. When the cycle has finished, the end of
cycle signal will sound (if set). Promptly remove items when
cycle is done to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE button to pause washer; the lid will unlock
once the washer movement has stopped. This may take several
minutes if the load was spinning at a high speed. Then close
lid and touch and hold START/PAUSE button again for up to
3 seconds to restart the cycle.
IMPORTANT:
If lid is left open for more than 10 minutes the
water will pump out and F8E6 error code will appear on the
display.
10.
Select SOIL LEVEL
Once you select a cycle, select the soil level by touching the
Soil Level button to the desired setting.
Light soils
Colors that
bleed or
fade
Heavy
soils
Whites
Pastels
Moderate
soils
Bright
colors
11.
Select SPIN SPEED
Once you select a cycle, you may adjust the spin speed
by touching the Spin Speed button until you reach the
desired setting.
13.
Select DEEP FILL mode, if desired
Once you select a cycle, you may add additional water to the
wash by pressing the Deep Fill button.
Summary of Contents for MVWB765FW0
Page 3: ...3 ...
