8
Display
When power is first supplied to the range, or if a power failure has
occurred, “12:00” will appear on the display. See “Clock” in the
“Settings” section to set time of day.
When the oven is not in use, the display shows the time of day.
Cancel
The Cancel pads stop any function except the Clock, Timer and
Control Lock.
Oven Lights
While the oven doors are closed, press OVEN LIGHT to turn the
lights on and off. Both oven lights will come on when either door
is open. The oven lights will not come on during the Self-Clean
cycle.
Kitchen Timer
The Kitchen Timer can be set in hours or minutes up to 9 hours
and 59 minutes, and counts down the set time. The Kitchen
Timer does not start or stop the oven.
To Set:
1. Press KITCHEN TIMER.
“Set TIMER” will scroll down the upper text display area, and
the clock will display “--:--” with the colon flashing.
2. Press the Temp/Time “+” or “-” pads until the desired time is
reached.
“Press TIMER” will scroll down the upper text display area.
3. Press KITCHEN TIMER to start the timer. The colon stops
flashing, and the time begins counting down. “TIMER
STARTED” will scroll down the upper text display area.
The last minute of the timer countdown will be displayed in
seconds.
At the end of the set time, one long beep will sound, and
“TIMER End” will be displayed.
4. Press KITCHEN TIMER to clear the display.
NOTE: A reminder beep will sound until the Kitchen Timer is
canceled.
To Cancel:
Press KITCHEN TIMER.
Settings
Settings enables you to personalize audible tones and oven
operation to suit your needs. After completing your adjustments,
press a CANCEL key or wait 30 seconds for the display to show
the time of day.
Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.
1. Press SETTINGS once.
“TEMP UNIT” will appear in the upper text area while
“FAHRENHEIT. Press (+) for Celsius” will scroll twice from
right to left in the lower text area.
2. Press the Temp/Time “+” pad to change the temperature unit
setting.
“CELSIUS. Press (+) for Fahrenheit” will scroll twice from right
to left in the lower text area.
3. “CELSIUS Selected” will scroll twice from right to left in the
lower text area. The temperature units have been changed.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■
Valid pad press
■
End of Kitchen Timer (long tone)
■
Function has been entered
■
Oven is preheated
Three tones
■
Invalid pad press
Four tones
■
End of cycle
Adjusting Sound On or Off
The oven sound is factory preset for On but can be changed to
Off.
1. Press SETTINGS twice until “SOUND” appears in the upper
text area and “ON. Press (+) for OFF” scrolls twice from right
to left in the lower text area.
2. Press the Temp/Time “+” pad to turn the sound Off. “OFF.
Press (+) for ON” will scroll twice from right to left in the lower
text area.
3. “OFF Selected” will scroll twice from right to left in the lower
text area. The sound has now been turned off.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press SETTINGS 3 times until “SOUND VOLUME” appears in
the text area and “HIGH. Press (+) for LOW” scrolls twice
from right to left in the lower text area.
2. Press the Temp/Time “+” pad to turn the sound Low. “LOW.
Press (+) for HIGH” scrolls twice from right to left in the lower
text area.
3. “Low Selected” scrolls twice from right to left in the lower text
area. The sound volume has now been changed.
Adjusting End Tone On or Off
The end tone is factory preset for On but can be changed to Off.
1. Press SETTINGS four times until “END TONE” appears in the
upper text area and “ON. Press (+) for OFF” scrolls twice from
right to left in the lower text area.
2. Press the Temp/Time “+” pad to turn the end tone Off. “OFF.
Press (+) for ON” will scroll twice in the lower text area.
3. “OFF Selected” will scroll twice from right to left in the lower
text area. The end tone has now been turned off.
Adjusting Keypress Tone On or Off
The keypress tone is factory preset for On but can be changed to
Off.
1. Press SETTINGS five times until “KEYPRESS TONE” appears
in the upper text area and “ON. Press (+) for OFF” scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time “+” pad to turn the keypress tone Off.
“OFF. Press (+) for ON” will scroll twice in the lower text area.
3. “OFF Selected” will scroll twice from right to left in the lower
text area. The keypress tone has now been turned off.
Adjusting Reminder Tone On or Off
The reminder tone is factory preset for On but can be changed to
Off.
1. Press SETTINGS six times until “REMINDER TONE” appears
in the upper text area and “ON. Press (+) for OFF” scrolls
twice from right to left in the lower text area.
