5
1
3
2
5
7
8
TANK
(3/8" Yellow)
PRODUCT
(3/8" Blue)
4
DRAIN
(1/4" Black)
INLET
(1/4" Red)
(1/4" Yellow)
MOUNT HOLDING
TANK ON SHELF OR
STRAP BETWEEN
FLOOR JOISTS
(shelf or straps not
included)
1" AIR GAP
REQUIRED
ACTIVATED
CARBON
MODULE
MEMBRANE
MODULE
SEDIMENT/
CARBON
MODULE
FLOOR
6
NOTE:
DISPENSING FAUCET AND FEED WATER VALVE ARE NOT PART OF THIS
CERTIFIED SYSTEM
NOTE:
IF AIR GAP IN FAUCET IS NOT USED IN BASEMENT INSTALLATIONS,
A PROPER AIR GAP MUST BE CREATED. PLEASE CHECK WITH LOCAL PLUMBING CODES.
SEE EXAMPLE ABOVE.
BASEMENT FLOOR
NOTE:
FOR REFRIGERATOR WATER DISPENSER OR ICE MAKER HOOKUP, TEE INTO
3/8" BLUE TUBING TO DISPENSING FAUCET.
Close-up of Manifold
Refer to section “Manifold Assembly
Instructions” on Page 8
1. Dispensing Faucet
2. Cover
3. Holding Tank Shutoff Valve (Open Position)
4. Drinking Water Holding Tank
5. Manifold
6. In-line Activated Carbon Post Filter
7. Polytube Tee
8. Feed Water Valve (cold water line only)
Figure 2:
O
ptional
M-550
Basement Installation Diagram
