background image

15

MAYTAG™ DRINKING WATER SYSTEM

MODEL M-550

LIFETIME LIMITED WARRANTY

The LeverEdge (hereinafter LE) warrants any MAYTAG™ brand water treatment system manufactured by LE and installed by a duly 

authorized Maytag dealer, to be free from defects in materials and workmanship to the original residential purchaser (hereinafter 

CONSUMER) from the date of purchase. All aspects of this warranty are subject to the following limitations, terms and conditions.

1.  DURATION OF WARRANTY

If LE Equipment consisting of the Mineral and Storage Tanks, Controls and Valves, Pumps and Switches, Ion Exchange Resin 

and Treatment Media, Drinking Water Systems (excluding replacement exchange modules or inline filters) and Ultraviolet Lights 

(excluding bulbs and sleeves) is determined to have failed as a result of a manufacturing defect, LE will, at its sole discretion, 

repair or replace the defective part at NO CHARGE to the CONSUMER (excluding labor, and applicable shipping and handling 

costs) for the duration of the Consumer's ownership of the original equipment (hereinafter “LIFETIME”).

2.  LIMITATIONS OF COVERAGE

This warranty extends only to the CONSUMER for damage resulting from defects in materials and workmanship, and does not 

include renewable components. It does not extend to damage caused by the CONSUMER’S neglect or abuse, or by accident, 

to damage caused by wind, hail or abnormal weather conditions, or to damage caused by acts of God, civil insurrection or 

extraordinary circumstances beyond the control of LE.
LE shall not be liable for any direct or indirect damage resulting from the use of the Equipment, and in no event shall the extent 

of this Warranty coverage exceed the purchase price of the Equipment. 
LE cannot know the characteristics of a CONSUMER’S water supply or the purpose for which one is purchasing MAYTAG™ 

Equipment. Also, water qualities vary seasonally and over time. Therefore, LE assumes no liability for the determination of the 

proper equipment necessary to meet a CONSUMER’S requirements, nor does it authorize others to assume such obligations on 

its behalf.
This warranty excludes any Equipment which was not manufactured by LE and installed by an authorized Maytag dealer or 

on which the date code has been removed or altered. Any tampering or attempted repair performed by anyone other than an 

authorized dealer, including the CONSUMER, voids this Warranty.

3. 

MISCELLANEOUS

In order to be considered for validation, all claims for Warranty coverage must be accompanied by a copy of the purchase 

agreement indicating the date of initial installation, and a copy of the CONSUMER’s current utility bill. LE reserves the right to 

inspect the MAYTAG™ Equipment prior to honoring any warranty claim.
This warranty is only issued by LE, and the CONSUMER is hereby advised that Maytag is not the manufacturer of the equipment, 

and provides no additional or separate warranty whatsoever in connection with the equipment.
This warranty gives you specific legal rights, and you may have other rights which may vary from state to state. Any and all 

inquiries or claims under this Warranty must be submitted in writing to The LeverEdge, Attn: Warranty Department, 1423 Gunn 

Highway, Odessa, FL 33556.

THE LEVEREDGE

1423 Gunn Highway

Odessa, FL 33556

Phone: (866) 910-8351

www.theleveredge.com

WHAT’S INSIDE MATTERS

TM

3LWR-MAYTAG

© 1.2019 The LeverEdge Rev 00.0000

Summary of Contents for M-550

















Reviews: