Disassembly Procedures
To avoid the risk of electrical shock, personal injury or
death, disconnect power to oven and discharge
capacitors before following any disassembly procedure.
WARNING
!
22
16023053 Rev. 0
©2004 Maytag Appliances Company
Controller Removal (Electronic Models)
1. Disconnect power to oven and remove outer case,
(see "Outer Case" procedure).
2. Remove control panel, (see "Control Panel" section).
3. Disconnect keypad ribbon connector .
NOTE:
Caution should be used when removing ribbon
from connector. Ribbon cable has two holes to
align and lock ribbon to connector.
4. Remove screws securing controller to control panel
assembly.
Key pad
Door release button
Release lever
Button spring
Control panel
Controller
5. Reassemble in reverse order.
NOTE:
Do not flex controller.
Key Pad Removal
1. Disconnect power to oven and remove outer case,
(see "Outer Case" procedure).
2. Remove control panel, (see "Control Panel Removal"
section).
3. Disconnect ribbon connector.
4. Peel off failed key pad from control panel.
6. Reassemble in reverse order.
Timer Removal (Dial Models)
1. Disconnect power to oven and remove outer case (see
"Outer Case" procedure).
2. Remove control panel, (see "Control Panel" section).
3. Remove screws securing timer to control panel.
4. Remove knob from timer.
5. Reassemble in reverse order.
Control panel
Button spring
Door release button
Release lever
Knob
Timer motor
Tabs
All Models
Door Release Lever / Release Button / Spring
1. Disconnect power to oven and remove outer case
(see "Outer Case" procedure).
2. Carefully pry tab on control panel to disengage
release lever from control panel.
3. Push (4) tabs on door release button and remove
button from control panel.
4. Remove spring from door release button.
5. Reassemble in reverse order.
