6.2.2 Monthly Inspection tasks
Task
Action
Drain the tanks
Follow the on-screen maintenance
instructions in the settings menu.
Check the heat temperature sensor
Clean gently with a damp cloth or cotton
swab.
Check the heat reflector
Wipe down the heat reflector.
Check the rail lubrication
Apply recommended lubricant if dry.
7
TROUBLESHOOTING AND REPAIR
7.1
How to identify and solve problems
This product is not intended for end user repair due to specialised pressure equipment inside
the machine. Opening or modifying the machine will void your warranty and could cause serious
injury or death.
Error
Cause
Solution
Machine leaks when
forming.
Seal is dirty or mis-set.
Clean seal and ensure it is
properly set into the dome.
Plastic dips or raises too
much during heating.
Temperature sensor is
obstructed or dirty.
Make sure the temperature
sensor is clean and free
from debris.
Plastic bursts during
forming.
Mold has too many
undercuts or improper
Use a different design of
mold that better caters for
Summary of Contents for Multiplier MMUA22100AA
