elements for
thermoforming.
the properties of
thermoforming.
Plastic does not form
around molds properly.
Machine was left closed too
long before locking and
forming, allowing the sheet
to cool.
Close and lock the machine
faster to maintain plastic
temperature.
Error code on display.
Internal electronics failure.
Report to Mayku at
[email protected].
7.2
Frequently Asked Questions
Question
Answer
Where can I purchase sheets
for my machine?
You can purchase sheets on our website, at
mayku.me.
How much pressure does the
Multiplier use?
The Multiplier uses a maximum of 60PSI (4.1 Bar) in the dome
to form the sheet, and a maximum of 175PSI (12 Bar) in the
tanks for air storage.
What is the maximum
temperature of the Multiplier?
The Multiplier can form sheets up to 220°C (428°F).
How long does a form take on
the Multiplier?
A form on the Multiplier normally takes between 5-10
minutes.
For further information please visit:
platform.mayku.me
Summary of Contents for Multiplier MMUA22100AA
