29
2 Shutting down the machine
There are two ways to switch off the machine.
a)
In normal case by switching „Stop” on the “Start-Stop Switch”
mounted on the swinging cable.
In this case the machine may be restarted by pressing switch
“Start”.
b)
In case of emergency, the machine can be switched off by the
“
Emergency Stop
” switch.
If the
“Emergency Stop” is pressed, the machine stops
immediately and remains stopped. After
“Emergency Stop” is
eliminated, the machine can be started by pressing push button
“Start”.
3
Measures prior to and after a longer
shutdown
a) Before a long shutdown
•
Clean carefully the machine.
•
Grease and oil certain parts of the machine according to
maintenance plan.
•
Protect the machine against dirt and moisture (it should be
covered)
•
Disconnect the machine from power lines (electricity,
compressed air)
b) After a long shutdown
•
Grease and oil certain parts of the machine according to
maintenance plan.
•
Visually check the machine.
•
Connect the machine to required energy sources.
•
Start the machine as described in section „Initial start-up”.
