24
•
Place the required pot on the pot support.
•
Adjust the pot support height so that the clips of the pot
holding disk are a little below the pot edge.
•
Adjust the rear stop so that the pot is in the middle of the pot
support.
•
Move the pot holding disk again to close the pot receptacle
so that there is a little space left on the sides between the pot
and the clips of the pot holding disk.
•
Retighten the clamping lever.
•
Adjust pot scraper in such a way that excessive soil is
scraped from the pot.
•
Adjust lower scraper brush in such a way that it cleans the
pot support.
•
Adjust upper scraper brush in such a way that it cleans the
clamps of the pot holding discs.
