Presets - Preset-Mode
DRM 2010 Operating Instructions, Revision Level 03/2004
5
UK
D
Selecting Presets
In order to choose an existing preset
from the corresponding preset list,
please go to preset mode (see right
column).
●
Press PRESET MODE.
●
Enter the preset number via digit
key (double digits shortly after each
other)
or
choose it from the existing preset
list by pressing TUNE UP or TUNE
DOWN.
Clearing Presets
Presets can be deleted at any time, in-
dependent whether preset mode (see
below) is switched on or off.
●
To delete the currently chosen pre-
set, press CLEAR. Display is show-
ing CLEAR now.
●
Press ENTER to confirm. Any other
key stops deleting.
If preset mode is activated, the device
changes to the next saved preset after
clearing. If there are no more presets
saved, preset mode is switched off au-
tomatically.
Preset-Mode
Saved station tunings and adjust-
ments can only be chosen if preset
mode is switched on.
●
To activate preset mode on or off,
press PRESET MODE. If preset
mode is turned on, PROG is shown
on the display.
When activating preset mode, preset
entry with the lowest consecutive
number will be selected. When leav-
ing preset mode, device will remain
tuned to the current station.
Numerical keys and TUNE UP and
TUNE DOWN have a different func-
tion in the preset mode. They then re-
fer to the preset list of the tuned re-
ceiving mode:
–
Numerical keys
stand for saved
presets on the basis of the consec-
utive numbers in the list. Therefore,
it is not possible to enter frequen-
cies directly in the preset mode.
Further, manual tuning and auto-
matic station search are not possi-
ble.
–
The keys TUNE UP and TUNE
DOWN
effect that the device chang-
es from entry to entry in the preset
list.
The keys SC UP and SC DOWN (se-
lecting a service component) are also
active in the preset mode. If they are
used in the preset mode, preset mode
is switched off.
Independent whether preset mode is
turned on or off, the current preset
number is visible on the left lower side
of the display.
