Frequency - Presets
4
© MAYAH Communications GmbH
UK
D
1) Entering exact frequency
●
Enter the frequency needed via digit
key and press ENTER.
The last digit in each case can be
cleared by pressing CLEAR.
In AM/DRM area
, frequencies can be
set exactly of up to 1 kHz (e.g.:
1-0-0-0-ENTER for 1000 kHz).
In FM area
, frequencies can be set
exactly of up to 10 kHz (e.g.:
1-0-0-6-0-ENTER for 100.60 MHz),
however, it is rounded up to the next
50-kHz-level (in this case 100,50
MHz).
2)
Using Automatic Station
Search
For automatic station search press
TUNE UP or DOWN for more than 2
seconds. As soon as a frequency with
a station signal has been reached, the
automatic station search will stop and
the programme will be played.
Automatic station search is only
possible with AM and FM.
3) Shifting Frequency
For shifting frequency press shortly, if
needed several times, TUNE UP or
TUNE DOWN. Each time you press
the button, frequency is changed by
50 kHz (FM) or 1 kHz (AM/DRM) up-
wards or downwards.
Station Memory (Presets)
The device is able to save up to 29
programmes including station adjust-
ment - so-called "presets“ - for every
receiving mode (DRM/AM/FM).
AM and FM:
preset consists of only
the frequency.
DRM:
preset also contains the chosen
service component and the setting of
the USB-output.
These presets are separately saved in
a numbered list for every single re-
ceiving mode (DRM/AM/FM).
Save Preset
●
In order to save a preset, tune the
station needed and select the serv-
ice components in question by
pressing SC UP or SC DOWN.
●
Press MEMO. PROG is now visible
on the display.
●
Now enter preset number via digit
key and press ENTER.
For saving presets, it is not impor-
tant whether preset mode (see
page 5) is switched on or off.
If an already existing preset is
saved inadvertently or deliberately
under a new number, the previous
preset number will be deleted au-
tomatically.
If a preset is to be saved under an
already used preset number, a
query is raised on the display.
