19
ENG
My training device makes noises during training – is this normal?
In addition to the air resistance braking system which creates construction and the air flow noises
when in use, noises also occur from the chain pulley. Your MAXXUS® training device is fitted with
extremely high-quality components which ensure that all operating, air flow and chain noises are
greatly reduced.
However, it is possible and normal that slight mechanical noises can be heard during training. These
mechanical noises, which can occur either continually or at intervals, are created by the sometimes
very high speed of the sliding seat during training. Also, the moving parts can generate noise during
training due to the hollow metal tubes which act as a resonator and amplify the sound.
It is completely normal for the operating noise to get louder during training. This can be explained
by an increase in training speed. The components can also expand with the heat generated during
training.
The cockpit does not show anything in the display when I turn it on.
Check if the battery is charged and change them if necessary. Check if the control cable has been
pinched or jammed during assembly and / or if the connector has come loose.
The values for rowing strokes/minute and distance are at “0” during training
Check if the control cable has been pinched or jammed during assembly and / or if the connector
has come loose.
My training device makes creaking noises during training.
Check if the training device is standing firmly and evenly on the ground. If necessary re-adjust the
stabilizers.
My feet fall asleep during training.
The reason for this is often that training shoes are done up too tightly. Your feet will expand when
you are under exertion and so you should do up your shoes more loosely. You can also get advice
regarding this from sports shops or specialist running shoe shops.
FAQ
