8
Step 3: Assembly of the Pendulum Tubes
Place the left pendulum tube (6) in the axle on the left side of the main frame.
Note
: It is good here to lubricate the axle well with commercially available multipurpose grease. Then secure the
pendulum tube (6) with an Allen screw M8x20 (68), one spring washer Ø8 (51) and a washer Ø8.2xØ25 (45).
Then insert the left handle (4) from above into the left pendulum tube (6) and fasten it with three Allen screws
M8x40 (69), three spacers Ø8.5 (50) and three lock nuts M8 (57).
Then place the two pendulum-tube covers (19-front / 20-rear) onto the pendulum tube and fix them with two
round head screws M5x15 (65).
Repeat this procedure with the right pendulum tube (7) and the right-hand handle (5).
Assembly
Summary of Contents for CX 9.1
