16
Step 2: Gender Input
Press the +/- keys to select the gender of the current user. ♂ stands for “male” and ♀ for “female”. Confirm your
entry by pressing the MODE key.
Step 3: Age Input
Press the +/- keys to enter the age of the current user. Confirm your entry by pressing the MODE key.
Step 4: Height Input
Enter the height of the current user by pressing the +/- keys. Confirm your entry by pressing the MODE key.
Step 5: Body Weight Input
Enter the body weight of the current user by pressing the +/- keys. Confirm your entry by pressing the MODE
key.
The “Profimatrix” will display an “M” and now you can continue with the program selection.
If you want to change the user, end the current training, press the “R” key briefly once (single-reset). “M” will
flash in the display again. Now press the “R” key for approx. 5 seconds (complete-reset). Now you can select a
free user profile and enter the new user data or select a previously saved user.
Manual Training
Step 1: Select a Program
After you start pedalling and the cockpit has switched itself on, and you have selected your user profile, select
program “M” by pressing the PROGRAM key. Confirm your selection by pressing the MODE key.
Step 2: Select a Training Target
You can now specify one of three different training target values:
Step 2.1: Training time
“0:00” flashes in the TIME window. If you want to specify the training time as the training target, select the de
-
sired training time from 01:00 to 99:00 by pressing the +/- keys. Confirm your entry by pressing the MODE key.
If you want to select a different training target, press the MODE key directly.
Step 2.2: Training Distance
“0.00” flashes in the DISTANCE window. If you want to specify the “training distance” as the training target, enter
the desired training distance from 00:00 to 99:50 kilometres by pressing the +/- keys. Confirm your entry by
pressing the MODE key.
If you want to select a different training target, press the MODE key directly.
Step 2.3: Calorie Consumption
“0” flashes in the “CALORIES” window.” If you want to specify “Calorie consumption” as the training target, enter
the desired calorie consumption from 0 to 990 calories by pressing the +/- keys. Confirm your entry by pressing
the MODE key.
NOTE:
It does not make sense to specify more than one of the possible three training targets so you should decide on
one target before you start with your training session.
Step 3: Specification of the Top Pulse Limit
The window PULSE flashes “0.” If you want to set a top pulse limit enter this by pressing the +/- keys. Confirm
your entry by pressing the MODE key.
Step 4: Training Start
Press the START / STOP key to start training.
During training you can select and change the workload level by pressing the +/- keys.
The training session ends automatically when the given training target has been reached.
Cockpit
Summary of Contents for CX 9.1
