Maxxus CX 9.1, Installation & Operating Manual

Page: 19 / 36

19
ENG
Program P11 – Resistance Levels
Program P12 – Resistance Levels
Cockpit
USER Training Profile
Step 1: Select a Program
After you start pedalling and the cockpit has switched itself on, and you have selected your user profile, select
program “U” by pressing the PROGRAM key. Confirm your selection by pressing the MODE key.
Step 2: Segment specification – Resistance Levels
The first segment of the training profile and the resistance level will flash. Enter the desired resistance level for
this segment by pressing the +/- keys. Confirm your entry by pressing the MODE key.
Now the segment 2 will flash. As the training profile consists of 16 segments you will need to repeat the proce -
dure for segment 1 to make an entry for all 16 segments. When the last entry for segment 16 has been complet-
ed, press the MODE key to confirm and proceed to Step 3.
Step 3: Specification of the Training Time
Press the MODE key for approx. 3 to 5 seconds until the value in the TIME window flashes. Now enter the de -
sired training time from 01:00 to 99:00 minutes by pressing the +/- keys.
Step 4: Training Start
Press the START / STOP key to start training.
Training ends automatically when the specified training time has been reached.
Training with an already created and saved training program
Step 1: Select a Program
After you start pedalling and the cockpit has switched itself on, and you have selected your user profile, select
program “U” by pressing the PROGRAM key. Confirm your selection by pressing the MODE key.
Step 2: Specification Training Time
The existing training profile will be displayed and the first segment will flash. Press the MODE key for about 3 to
5 seconds until the value in the TIME window flashes. Now enter the desired training time from 01:00 to 99:00
minutes by pressing the +/- keys.
Step 4: Training Start
Press the START / STOP key to start training.
Training ends automatically when the specified training time has been reached.