6
Carefully unpack all delivered parts. Have someone there to help you as some of the training device parts are bulky and heavy.
Check that all the parts and fixing materials (screws, nuts, etc.) have been delivered.
Assemble the parts carefully as any damages or defects occurring due to mistakes made at the time of assembly are not covered by
the warranty or guarantee. Therefore, read through the assembly instructions carefully before you start assembling, follow each as-
sembly step exactly as described and keep to the correct sequence of assembly as instructed. Take care of your own safety especially
during assembly. Wear suitable work gloves and get a second person to help you with large or heavy parts. Secure any moving parts
so that no parts of the body can get jammed in them during assembly. Assembly of the training device must be carried out thoroughly
by adults only.
Assemble the training device in a location which is level, clean and clear of obstructions. 2 people are required to carry out the assem-
bly. Training can only start when the training device has been fully assembled.
(1) Washer (B33)
Ø5/16"xØ20x2.0T x 4 pcs
(2) Washer (B42)
Ø3/8"xØ20x2.0T x 4 pcs
(3) Curved Washer (B30)
Ø20xØ8x1.5T x 12 pcs
(4) Round Head Screw (B23)
M6x15 x 8 pcs
(5) Carriage Bolt (B28)
M8x50 x 4 pcs
(6)Round Head Screw (B21)
M5x16 - 10 pcs
(7) Cap Nut (B43)
2 pcs
(9) Hex Bolt (B32)
M8x16 - 4 pcs
(10) Countersunk Bolt (B40)
M8x25 x 2 pcs
(11) Hexagon Bolt (B41)
3/8"x2 1/2 " x 2 pcs
(12) Lock Nut, (B29)
M8 x 4 pcs
(15) Allen Bolt (B13)
M8x18 x 8 pcs
(8) Wrench 13/14mm Phillips Screwdriver
(14) Allen Key M5
Your own tools can be used instead of or in addition to the tools included in delivery. Make sure that any tools used are suitable and an
accurate fit!
Step 1: Assembly of the End Caps
Insert the two cover caps (C04) in the right and left sides of the base frame (A01).
Assembly
