background image

RECOVERY

BODYFAT

RESET

START/STOP

MODE

17

ENG

The cockpit constantly shows the current training values. 

TIME 

Specification of the training time. For a given training session, the computer counts down the time to “00:00.” The training time can 

be set from “01:00” to “99:00” minutes in one-minute increments. If no time is specified, the computer will count the training time from 

„00:00” up to a maximum of „99:00” minutes. 

DISTANCE 

Specification of the training distance in kilometres. For a given training session, the computer counts down the distance back to “0.00.” 

The training distance can be set from 1.0 to 99.0 Kilometres in 1.0 km increments to maximum of 99.0 kilometres. If no training dis-

tance is specified, the computer will count the kilometres from 0.0 to a maximum of 99.0 kilometres. 

CALORIES* 

Indication of energy consumption in Kcal. For a given calorie consumption, the computer counts the calories down to 0. The calorie 

consumption can be set from 10 to 990 K in 10-Kcalorie increments. If the calorie consumption is not specified, the computer counts 

the K-calories from 0 to a maximum of 990 K-calories

Pulse or heart rate display - PULSE

When using the hand pulse sensors displays the current pulse value in beats per minute. When using an optional transmitter chest belt 

(not included) displays the current heart rate in beats / minute. 

SPEED

Current speed in km / h. Value is displayed alternately with RPM in the same window.

Revolutions per minute - RPM

Specification of the current wheel revolution per minute (RPM). Value is displayed alternately with SPEED in the same window. 

Resistance - LEVEL 

Display of the currently selected resistance level from 1 to 16. 

Power - WATT**

Display of the power output in Watts. 

* Warning about the calorie measurement

Energy consumption is calculated by means of a general formula. It is not possible to determine the exact energy consumption individually as this requires a large amount of 
personal data. The energy consumption displayed is approximate and not an exact value. 

**Warning about the Watt display

Since this is a training device suitable for non-therapeutic purposes, the displayed value in Watts is not a calibrated value. The displayed power generated may differ from the 

actual power generated. 

Cockpit

USB port with charging function

LCD display

Storage compartment for 

Smartphone, Tablet PC

Rotary control knob

RESET key

START / STOP key

Recovery pulse measurement 

Body fat analysis

Summary of Contents for CX 4.3F





































Reviews: