Maxxus 600354-00019-0001, Installation & Operating Manual

Page: 6 / 32

44
108
108
112
1
112
6
Assembly
Carefully unpack all parts of the delivery. Two people are required because some parts of your exercise ma-
chine are bulky and heavy. Before mounting, check the completeness of the assembling hardware (screws,
nuts, etc.) and the components in the parts and fastening materials list on the previous pages of this manual.
Carefully carry out the installation, as damage or defects that have arisen due to assembly errors are not
covered by the warranty
under any circumstances
. Read the instructions carefully before starting, follow the
sequence of the installation steps exactly and follow the instructions for the individual assembly steps. The
installation of the training device must be carried out by responsible adults.
Carry out the installation of your exercise equipment with two adults in a location that is level, clean and free
of obstruction during assembly. Only after assembly of the training device has been completed can training be
started.
Step 1: Assembling the Rear Stabiliser
Loosen and remove the screws holding the transport lock on the rear mount of the base frame (1) and then
remove the transport lock.
Then attach the rear stabiliser (44) using four Allen screws M10x20 (108) and four corrugated washers M10
(112) to the rear mount of the base frame (1).
Transport Lock