Cordless Spray Mop with Suction Function
EN
13
is damaged or deformed. Always
dispose of used devices with batteries
that cannot be removed as a whole
entity via an offi cially approved waste
disposal company (e.g. recycling
depot).
WARNING – Danger of Fire!
■
Do not charge up the device in the
vicinity of highly fl ammable materials
(curtains, textiles, etc.).
■
Do not cover the device during oper-
ation or charging in order to prevent
it from catching fi re. Do not insert
anything into the ventilation openings
of the device and make sure that they
do not become clogged.
NOTICE – Risk of Damage to
Material and Property
■
Charge and store the device only in
closed rooms.
■
The device should only be used if it
has been fully and correctly assem-
bled!
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
■
Do not place heavy objects on the
device or the connecting cable.
■
Make sure that the connecting cable
is not squashed, bent or laid over
sharp edges and does not come into
contact with hot surfaces. Do not wind
the mains cable around the mains
adapter.
■
When you pull the mains adapter out
of the plug socket, always pull on the
mains adapter and never the mains
cable!
■
Protect the device from impacts.
ASSEMBLING THE DEVICE
1. Plug the stem (
A
) into the top of the
main unit (
C
). It must engage audibly.
2. Plug the handle (
D
) into the stem. It
must engage audibly.
CHARGING UP THE
BATTERY
Please Note!
■
Only connect the mains adapter to a
plug socket that is properly installed
and matches its technical data. The
plug socket must be readily accessible
after connection so that the con-
nection to the mains can quickly be
isolated.
■
Only use suitable extension cables
whose technical data is the same as
that of the mains adapter.
■
Pull the mains adapter out of the plug
socket if an error occurs during charg-
ing or before a thunderstorm.
■
It is essential that you charge up the
battery fully before you fi rst use the
device in order to achieve the maxi-
mum charging capacity. If the battery
is fully discharged during use, it must
be fully charged up again before it is
next used.
1. Plug the barrel connector of the
connecting cable into the charging
socket (
5
).
2. Connect the mains adapter to a plug
socket.
The operating lamp (
11
) fl ashes and
the battery is charging.
If the operating lamp is permanently
lit, the battery is fully charged.
3. Pull the mains adapter out of the plug
socket and the barrel connector out of
the charging socket.
