EN
16
CLEANING AND STORAGE
Please Note!
■
During cleaning make sure that no
liquid gets into the main unit (apart
from the water tank) or the handle.
■
Do not use any sharp or abrasive
cleaning agents to clean the housing.
They may damage the surfaces.
The mop pads may lose some
of their colour over time. This
is normal and does not have
any adverse effect on function.
However, if one of the mop pads
is damaged or worn, it must be
replaced.
• If there is still water in the water tank,
empty it.
• Clean the device with a damp, soft
cloth if necessary. Then dry it with a
soft cloth.
• Pull the mop pads off the cleaning
feet (
8
) and clean them. Note the
washing label when you do this!
Please Note:
Wash separately or with
the same colours. Do not use fabric
softener.
• Charge up the battery after each use
(see the “Charging Up the Battery”
chapter).
• Store the device and the accessories
in a dry place that is protected from
sunlight and is not accessible to chil-
dren and animals.
TROUBLESHOOTING
If the device does not work properly,
check whether you are able to rectify the
problem yourself. If the problem cannot
be solved with the steps listed, contact
the customer service department.
Do not attempt to repair an
electrical device yourself!
The battery is not charging up. The
battery status display (7) does not
light up when the device is connect-
ed to the mains power.
The mains adapter is not inserted cor-
rectly in the plug socket.
►
Correct the fit of the mains adapter.
The barrel connector is not plugged in
the charging socket (
6
) of the device
correctly.
►
Correct the connection between the
charging socket and barrel connector.
The plug socket is defective.
►
Try another plug socket.
There is no mains voltage.
►
Check the fuse of the electrical dis-
tributor (fuse box).
The device cannot be started.
The battery of the device is too weak.
►
Charge up the battery.
The release mechanism in the stem
mount (
5
) has been triggered.
►
Activate the device by tilting the stem
or the stem mount backwards.
The battery in the handle (
C
) is too weak.
►
Replace the battery.
The device is not working properly.
The fl oor is unsuitable for the device.
►
The device only works on smooth
fl oors such as parquet, laminate, tiles
etc.