February, 2019
eMAX-MR62e-Man
Page 3 of 16
1. General:
The eMAX-MR62e OSDP Reader Interface Module provides a network connected interface to
control two physical barriers using OSDP readers, and provides a solution for Maxxess
Installers/Integratosr for interfacing to OSDP readers and door hardware. The on-board Ethernet
with PoE/PoE+ support enables easy installation. The eMAX-MR62e supports up to four OSDP
readers configured as paired or alternate readers.
Note: For UL, the Power Sourcing Equipment (PSE) such as a PoE/PoE+ enabled network switch
and/or PoE/PoE+ power injectors must be UL Listed under UL294B.
One serial 2-wire RS-485 data communication port is available and can accommodate up to four
OSDP readers that are controlling two (2) portals (In/Out paired reader mode). Four Form-C Relay
Outputs may be used for door strike control or alarm signaling. The relay contacts are rated at 2 A
@ 30 Vdc resistive, and are in a dry contact configuration.
Six inputs are provided that may be used for monitoring the door contacts, exit push buttons, and
alarm contacts. Input circuits can be configured as unsupervised or supervised. The eMAX-MR62e
requires PoE, PoE+ or local 12 Vdc for power. The eMAX-MR62e may be mounted in a 3-gang
switch box with the mounting plate that is supplied with the unit. Or it can be mounted in a standard
Maxxess enclosure. The supplied mounting plate has mounting holes that match the MR50
mounting footprint.
