February, 2019
eMAX-MR62e-Man
Page 12 of 16
Mounting Plate Dimensions
:
3.85 [97.8]
2.35 [59.7]
5.50 [139.7]
3.63 [92.1]
3.30 [83.8]
3.63 [92.1]
Ø0.16 [Ø4.0]
MR50 MGT HOLES
4PL
Ø0.16 [Ø4.0]
3-GANG MGT HOLES
4PL
14. Warranty
Maxxess Systems, Inc. warrants this product is free from defects in material and workmanship under
normal use and service with proper maintenance for one year from the date of factory shipment.
Maxxess Systems, Inc. assumes no responsibility for products damaged by improper handling or
installation. This warranty is limited to the repair or replacement of the defective unit.
There are no expressed warranties other than set forth herein. Maxxess Systems, Inc. does not
make, nor intends, nor does it authorize any agent or representative to make any other warranties,
implied or otherwise, and expressly excludes and disclaims all implied warranties of merchantability
or fitness for a particular purpose.
Returned units are repaired or replaced from a stock of reconditioned units. Returns must be
accompanied by a return authorization number (RMA) obtained from customer service, and prepaid
postage and insurance.
Liability
The Interface should only be used to control exits from areas where an alternative method for exit is
available. This product is not intended for, nor is rated for operation in life-critical control applications.
Maxxess Systems is not liable under any circumstances for loss or damage caused by or partially
caused by the misapplication or malfunction of the product. Maxxess Systems liability does not
extend beyond the purchase price of the product.
