February, 2019
eMAX-MR62e-Man
Page 16 of 16
You should then see:
The first check box is telling you that the Dip Switch settings must be reset to off.
The 2
nd
check box is telling you that no special User Accounts were defined.
If you wish to proceed, check both of the check boxes, then click on the
“Apply and Reboot” box to
proceed.
You should see a message that says
“
Board is rebooting
”.
You can then logout.
Remember that you should ALWAYS create a USER Account. When a new user is added, it disables the
default admin user. It is strongly recommended that a new user account be added during this
configuration process. Browse to the Users link and add a user. If the new user details are ever lost, the
controller dipswitch S1 may be used to re-enable the default user.
