Vengeance
3
User
’s Manual
28
LAN Module Expansion
LAN Bypass Control Jumper (JP2/JP3)
Use this jumper to select the LAN Bypass Function.
Description
Function
Jumper
Setting
LAN Bypass Trigger when
Power On
All SEG. Bypass as same as Power Off status
JP3
JP2
All SEG Bypass Disable(Default)
JP3
JP2
All SEG Bypass Enable
JP3
JP2
Note: When the system is turned on, you can select LAN bypass function by Jumper and
Bios when power on state, when enter the OS, you can select LAN bypass function
at power on/ off state by software ,the detail information please refer to the appendix
A.
LED Definition
MW-CM-8P-GbE
LAN bypass LED
LAN bypass LED
While running the LAN By-Pass function, the LED always lights up.
Active LED (Single color)for LAN port #1, port#2, port#3, port#4, port #5, port#6,
port#7, port#8
The orange LED is on when the LAN port connection is working.
The LED flashes when transmitting or receiving any signals to or from the appliance.
The LED is dark when the appliance is off.
