Vengeance
3
User
’s Manual
2
2
Hardware and Installation
2.5.2
Installing the Memory
The board supports four 240-pin DDR4
UDIMM memory sockets with
maximum memory capacity up to 32GB
for each socket.
Please follow steps below to install the
memory modules:
1.
Push down latches on each side of the
DIMM socket.
2.
Align the memory module with the
socket that notches of memory
module must
match the socket keys
for a correct installation.
3.
Install the memory module into the
socket and push it firmly down until it
is fully
seated. The socket latches are
levered upwards and clipped on to the
edges of the
DIMM.
4.
Install any remaining DIMM modules.
2.5.3
Installing the Hard Disks
The system supports
two 2.5” HDDs
Two 2.5” HDD
