EN
24
3. Press the button to open the dust container (
7
). The bottom
of the dust container (
7
) will open and the dirt will fall out.
4. Flip the bottom of the dust container (
7
) shut again. The
catch must be heard to engage in place.
Cleaning the Dust Container, Air Filter, Dust Filter, Micro-Air Filter and
Micro-Dust Filter
1. Press the release button (
10
) of the dust container (
7
) and pull it out of the device by
the carrying handle.
2. The
fi
lters are located inside the dust container (
7
). To remove them, lift up the tab to
open the dust container lid (
4
) and open the dust container lid (
4
).
3. Take the micro-dust
fi
lter (
A
), dust
fi
lter (
C
) and air
fi
lter (
D
)
out of the dust container (
7
) and remove the micro-air
fi
l-
ter (
B
) from the micro-dust
fi
lter (
A
). Tap out all
fi
lters or
brush them out with a soft brush to remove dirt and dust. If
necessary, thoroughly rinse the
fi
lters using clear, luke-
warm water.
CAUTION:
Do not under any circumstances clean the
fi
l-
ters in a washing machine or dishwasher! Under no cir-
cumstances should you dry it in a tumble-dryer. Shake off
excess water and let the
fi
lters dry completely in the air.
4. Thoroughly rinse the dust container (
7
) with clear, luke-
warm water if necessary.
CAUTION:
Do not under any
circumstances clean the dust container (
7
) in a washing
machine or dishwasher! Shake off excess water and let
the dust container (
7
) dry completely in the air.
5. Once all the parts have dried, insert the micro-air
fi
lter (
B
) back into the micro-dust
fi
lter (
A
). Insert the air
fi
lter (
D
), dust
fi
lter (
C
) and micro-dust
fi
lter (
A
) along with the
micro-air
fi
lter (
B
) into the dust container (
7
). When you do this, make sure that the
air
fi
lter (
D
)
fi
ts securely in the recesses of the dust container (
7
).
6. Flip the lid of the dust container (
4
) shut again. You must hear and feel it engage.
7. Insert the dust container (
7
) into the device. Grip the carrying handle and
fi
rst place
the bottom of the container into the device. Then press the carrying handle against
the device housing until the dust container (
7
) audibly engages in the locking catch.
Lift up the device by the carrying handle to check whether the dust container (
7
) is in
the correct position.
A
B
C
D
Summary of Contents for 06289
Page 56: ......
