21
EN
Inserting / Removing the Telescopic Tube
• Inserting: Plug the open end of the handle into the match-
ing opening of the telescopic tube (
3
). Twist the handle
back and forth slightly as you do this. Then check the con-
nection to make sure there is a secure
fi
t.
• Removing: Simply pull the telescopic tube (
3
) away from
the handle.
Adjusting the Length of the Telescopic Tube
• Push the slider on the telescopic tube (
3
) downwards and
pull the telescopic tube (
3
) out to the length you want.
• Release the slider and move the telescopic tube (
3
) a little
bit more until it engages.
Attaching / Removing Suction Nozzles
• Attaching: Plug the free end of the telescopic tube (
3
) as far as it will go into one of
the suction nozzles supplied. Twist the suction nozzle back and forth slightly as you
do this.
• For
greater
fl
exibility, the suction nozzles can also be plugged directly onto the suc-
tion hose (
9
), without the telescopic tube (
3
).
• Removing: Simply pull off the suction nozzle you have used.
Note on the big turbo nozzle:
When the big turbo nozzle is removed, the adapter sleeve may remain
stuck on the telescopic tube (3). Please note that the other suction noz-
zles can only be
fi
tted on the telescopic tube (3) if the adapter sleeve
has been removed from the telescopic tube (3)!
Inserting / Removing the Dust Container
• Removing: Press the release button (
10
) of the dust con-
tainer (
7
) and pull it out of the device by the carrying handle.
• Inserting: Grip the dust container (
7
) by the carrying handle
and
fi
rst insert the bottom of the container into the device.
Then press the carrying handle against the device housing
until the dust container (
7
) audibly engages in the locking
catch. Lift up the device by the carrying handle to check
whether the dust container (
7
) is in the correct position.
Summary of Contents for 06289
Page 56: ......
