VENTAMATIC, LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272
- 16 -
TROUBLE SHOOTING
FAULT
CAUSE
SOLUTION
Unit does not
operate
No power to machine.
Unit not switched on.
Plug in unit; check power at
outlet and at base of unit.
Switch unit on.
Fan not
turning
Obstructed air
outlet and
fan.
Remove obstruction.
Unit
operating,
but room not
dry
1. Not enough time
to dehumidify air.
2. Poor air movement
in room.
3. Excessive moist air
infiltration in room.
1. Allow more time for
drying.
2. Increase air movement
with fans.
3. Reduce outside air
infiltration into the room.
Unit collects
too little
water
1.Room air is dry.
2.Obstructed filter
and coils
3.Room temperature
is too low.
1.Check humidity with
hygrometer.
2.Check filter and coils;
clean as necessary.
3.Increase room
temperature.
WARNING:
DO NOT attempt to rectify faults using unqualified personnel.
If the problem you are experiencing is not listed here, call
1-800-433-1626.
