![background image](http://html1.mh-extra.com/html/maxworks/70275/70275_instruction-manual-and-parts-catalogue_1746623006.webp)
Limited Warranty
PGS LLC warrants to the original retail purchaser
that the product is free of defects in material and
workmanship at the time of shipment. This Aluminum
Cargo Carrier is warranteed for 90 days from the date
of purchase. This warranty is expressly in lieu of all
other warranties, express or implied.
Proof of purchase is required for warranty transac-
tions; a copy of the original invoice or sales receipt is
required.
Maximum Weight
Capacity
500 Lbs.
Construction
All Aluminum
For Use With
2” x 2” Class II, III and IV
Hitch Receivers
Cargo Bed
Dimensions
47-3/4” x 27-3/4” x 7”
Hitch Pin
5/8” Diameter with R-Pin
2 Included
SPECIFICATIONS
12 (continued)
To place both Ramps inside the Carrier Bas-
ket, carefully fold up the Ramps and lower
them towards the bed of the Carrier Basket.
Use the strap attached to the Carrier Basket
(1), to secure the Ramps inside the Carrier
Basket (see photo below).
folding and unfolding the Ramps.
Maintaining the Aluminum Cargo
Carrier
1. Frequently check the condition of the
Carrier and the vehicle’s hitch receiver.
Make sure all components are in good
condition. If the Carrier or hitch receiver
become damaged through accident, or if any
weld damage is noted, the product should be
replaced.
Check to make sure that all hardware is
tightly secured in place. Frequently check
the Anti-Tilt Locking Bracket (31) to make
sure that the two bolts on the underside are
tightened down to tie together the hitch re-
ceiver and the Hitch Bar (2).
Folded Ramp I
and Ramp II
Model 70275 Page 6
2. Keep the Carrier clean.
Strap