Maxwell MW-3803 BK, Manual Instruction, Page: 15 / 65

15
ENGLISH
other products and liquids is . The minimal
level of products in the bowl is .
– Place the bowl (8) into the unit body. Make
sure that the bowl (8) is placed evenly and
has a tight contact with the heating element
surface (fig. 2).
Note:
- Do not use the bowl (8) for washing cereals
and do not cut products in it, this can damage
the non-stick coating.
- Wipe the outer surface and the bottom of
the bowl (8) dry before use.
- Make sure that there are no foreign objects,
dirt and moisture on the heating element
surface and on the bottom of the bowl (8).
- In the middle of the heating element there
is a temperature sensor. Make sure that the
movement of the sensor is not limited.
– Before installing the lid check the blocking
system elements (7). They should be clean
and the blocking system valve (7) in the han-
dle (5) should be lowered (fig. 3).
– Place the lid (8) on the unit body so that the
lid blocking system (7) is within the sector of
the «Open - Close» indicator and then turn
the lid (8) clockwise till its complete locking
(fig. 4, 5).
– Set the valve (9) to the position (fig. 6,
7), in this position excessive pressure will be
released through the valve during the unit
operation.
– If you steam food, pour water in the bowl (8)
so that boiling water doesn’t reach the bottom
of the basket (12).
– Insert the power cord connector into the
socket on the back side of the multicooker
body.
– Insert the power plug into the mains socket;
you will hear a sound signal and the display
(3) illumination will light up.
Auto-cooking programs
– To choose an auto-cooking program press
the «MENU» button (19), the indicator of the
chosen auto-cooking program will blink on
the display (3).
– To launch the auto-cooking program press
«START» button (20) once, the heating ele-
ment will be switched on and the indicator
of the chosen program on the display (3) will
stop blinking.
– To stop the auto-cooking program, press the
“CANCEL” button (13), the heating element
will be switched off, and the chosen cook-
ing program indicator will be flashing on the
display (3).
Mode Operation time in minutes
Cereals 20
Meat jelly 80
Soup 22
Milk Porridge 10
Steam cooking 1-45
Multicooking
mode 0-99
Reheat 5-60
Vegetables 10
Fish 7
Meat 20
Baking/roasting 30
Attention:
In «Baking/roasting», «Reheat» and «Steam
cooking» modes the valve (6) should be
opened, i.e. set in the position
.
Attention:
– You can set the cooking time in the «Steam
cooking» and «Multicook» modes manually;
to do this, choose the required mode using
the «MENU» button (19) and repeatedly press
or hold the «Time setting» (16) «–» and (17)
«+» buttons.
– You can set the duration of the «Steam cook-
ing» program within the range from 1 to 45
minutes; the setting step is 1 minute.
– The duration of the «Multicook» program can
be set from 1 to 99 minutes, the step is 1
minute.
– The duration of the «Reheat» program is from
5 to 60 minutes, the step is 5 minutes.
– The set duration of the program is shown on
the display (3) with digital indication
“Delayed start” function
You can preset the time by which the cooking
process will start. This function is available in all
modes.
MW-3803_izmena.indd 15 14.03.2013 14:44:28