10
ENGLISH
– Take the garment steamer with your hand and
hold it in the area of the steam supply but-
ton (2).
– To switch the steam supply on, press and hold
the button (2).
– To switch the steam supply off, release the
button (2).
– Slowly move the garment steamer up the fab-
ric. Smooth the fabric with the free hand.
Notes:
– Hold the garment steamer vertically and do
not turn it over (pic. 4).
– During operation the upper part of the unit
body heats up strongly, be careful and do not
touch the hot parts of the unit body!
– Clothes should cool down and dry after steam-
ing, it may take some time.
– After the unit operation unplug the garment
steamer and let it cool down.
– Open the water inlet lid (3) and drain any remain-
ing water from the water tank (4) (pic. 5).
Note: - Continuous operation time of the gar-
ment steamer is no longer than 15-20 min-
utes.
Cleaning and care
– Unplug the garment steamer and wait till it
cools down, then drain the remaining water out
of the water tank (pic. 5).
– Clean the garment steamer body and the sur-
face with the steam release openings (1) with a
slightly damp cloth, and then wipe dry.
– You can remove scale from the surface with
the steam release openings (1) with a cloth
soaked in vinegar-water solution.
– Wash the brush-attachment (5) under water
jet having preliminary removed it from the gar-
ment steamer.
– Do not use solvents or abrasives for cleaning
the garment steamer.
Attention! Do not immerse the garment
steamer body, the power cord and the power
plug of the unit into water or other liquids.
Storage
– Unplug the unit and wait till it cools down com-
pletely.
– Drain the water from the water tank (4) (pic. 5)
and clean the garment steamer.
– Keep the unit away from children in a dry cool
place.
Transportation of the garment steamer at low
temperatures
– Before transportation the unit at low tempera-
tures, pour out water from the water tank (4).
– Insert the power plug into the mains socket,
the indicator (6) will light up.
– When the unit is ready for operation, the indi-
cator (6) will go out.
– Press and hold the button (2), wait until steam
release stops.
– Unplug the unit.
– Wait till the garment steamer cools down com-
pletely and pack it for transportation.
Delivery set
Garment steamer – 1 pc.
Brush-attachment – 1 pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50/60Hz
Power consumption: 840–1000 W
Water tank capacity: 0.2 L
The manufacturer preserves the right to change
the design and the specifications of the unit with-
out a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be ob-
tained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-Re-
quirements as laid down by the Council
Directive 2004/108/EC and to the Law
Voltage Regulation 2006/95/EC
MW-3704.indd 10
05.11.2013 11:11:55
Summary of Contents for MW-3704 VT
Page 1: ...Отпариватель MW 3704 VT 4 8 9 15 19 23 27 31 35 MW 3704 indd 1 05 11 2013 11 11 53 ...
Page 2: ...1 2 3 5 4 6 MW 3704 indd 2 05 11 2013 11 11 54 ...
Page 3: ...рис 1 рис 2 рис 3 рис 4 рис 5 MW 3704 indd 3 05 11 2013 11 11 54 ...
Page 40: ... ООО ГОЛДЕР ЭЛЕКТРОНИКС 2013 GOLDER ELECTRONICS LLC 2013 MW 3704 indd 40 05 11 2013 11 11 57 ...
