ENGLISH
12
–
Remove the shaving block (2) by pressing
on the front part of the block and removing
it from the groove on the unit body.
–
Clean the hair clipper and the shaving
block from hair using the brush (10).
–
Apply one or two drops of lubricating oil
(9) on the teeth of the blades and the sup-
porting part of the upper blade (pic. 1).
–
Insert the clamp ledges on the lower part
of the shaving block (2) into the grooves
on the unit body. Press on the upper part
on the block until clamping. Clicking of the
clamp indicates proper installation.
–
Turn the hair clipper on and make sure that
the blades move smoothly.
–
Switch the unit off, clean excess oil with
a dry cloth.
Attention! Use only the oil supplied with
the unit.
DO NOT USE vegetable oil, fat, oil mixed with
any solvents for lubricating.
Solvents will evaporate, leaving hick grease
that may slow down the blades motion.
Cleaning the clipper body
–
Switch the hair clipper off and make sure
that the unit is unplugged.
–
Clean the blades from hair, using the
cleaning brush (10).
–
Clean the attachment and the unit body
with a slightly damp cloth, and then wipe
them dry.
–
Do not immerse the unit into water or any
other liquid.
–
Never use solvents or abrasives to clean
the unit body and the attachment.
–
STORAGE
–
Clean the hair clipper and lubricate the
blades (2) with lubricating oil (9) before
taking the unit away for storage.
–
Keep the hair clipper in a dry cool place,
out of reach of children.
DELIVERY SET
1. Hair clipper (with shaving block) – 1 pc.
2. Attachment comb – 1 pc.
3. Power adapter – 1 pcs.
4. Comb – 1 pc.
5. Scissors – 1 pc.
6. Lubricating oil – 1pc.
7. Cleaning brush – 1 pc.
8. Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power adapter input voltage:
AC (alternating current) 230 V ~ 50 Hz
Power adapter output voltage:
DC (direct current) 1,5 V
Power consumption: 2 W
The manufacturer preserves the right
to change the specifications of the unit
without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the
EMC-Requirements
as
laid
down by the Council Directive
2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
MW-2109_105 x148.indd 12
15.01.2014 15:37:33
