background image

Contents:

Introduction   2
Proper use & operation 

2

Safety precautions 

 

3

Application example   

4

Product contents 

 

4

Required tools and equipment 

4

Selecting an installation location  5
Attaching Antenna Mount Plate    6
and LNB Park Plate
Attaching Antenna Unit to 

7

Mount Plate  

Introduction:

Please read these instructions fully before using the antenna for the first time. The operation of the antenna has 
been designed to be as simple as possible however should you require any technical assistance please contact 
Maxview customer service on +44 (0)1553 811000 or visit www.maxview.co.uk. 

Proper use & operation:

The Crank Up is designed to be installed in a motorhome, caravan or horsebox to automatically locate a television 
broadcast satellite when the vehicle is stationary.

The Antenna which is to be permanently mounted externally to the roof structure of a motorhome/caravan
horsebox. The construction of the roof structure should be suitably robust and have no protruding obstacles

Use of the equipment for any other purpose than the one specified is not permitted and will invalidate the 
warranty.

All instructions and models are subject to change. In accordance with policy of progressive product, the company 
reserve the right to alter specifications.

Copyright© these instructions are the sole property of Maxview Ltd and may not be reproduced.
Please keep these instructions safe for future reference.

Recycle packaging where facilities exist. 

Page 2

  
Installing cables 

 

8

Installing Handle 

 

9

Attaching Satellite Dish to Unit  12
Finding a satellite 

 

13

Start a search 

 

13

Lowering antenna 

 

15

Skew adjustment 

 

16

Warranty 

  17

Specifications   18
Quick reference table   

19

Satellite Zone Map 

 

20

Summary of Contents for Crank Up B2590/65





















Reviews: