9
Step 2: Program the WLS909 Function Buttons
WLS909 wireless keys have four programmable function buttons. When you press
and hold a button for two seconds, the programmed function will be executed.
Each function button can be assigned to one partition.
NOTE
: Wireless key function buttons will not work when the partition(s) they are
assigned to are being accessed for zone bypassing or programming.
1. From Installer’s Programming, enter Ref #[001304], to go to WLSKey Functions.
2. Scroll to the slot number of the key you want to program (01-16). Press [*].
3. Scroll to the number of the button you want to program (1-4). Press [*].
4. Enter the 2-digit number of the function you want to select, or scroll to the
function you want to assign to that button and press [*]. The following functions
may be programmed:
00 Null Key
07
Arm Interior
01 Stay Arm
08-15 [*][7] Command Outputs 1-8
02 Away Arm
16
Fire Alarm
03 No-Entry Arm
17
Auxiliary Alarm
04 Chime On/Off
18
Panic Alarm
05 System Test
19
Disarm (Off)
06 Quick Exit
NOTE
: If programmed, these options do not require access code entry regardless of
other system options. The programmed function will be executed immediately.
5. The LCD keypad will show Select (01) Partition 1. Scroll to the partition you
want the button to work in, and press [*] to select.
6. Repeat steps 3 to 5 until all the buttons are programmed.
7. Repeat steps 4 to 6 until all the wireless keys are programmed.
8. To exit, press [#].
NOTE
: When a Wireless Key is used to disarm a partition, all courtesy pulse outputs
enabled for that partition will activate for two minutes.
I N S T A L L I N G W I R E L E S S D E V I C E S
