11
Step 2: Program WLS910 Handheld Keypad Function Keys
Number keys [1], [2], [3] and [4] can be used as function keys on the WLS910
handheld keypad. When you press and hold one of the 4 function keys on the
keypad for two seconds, the programmed function will be executed.
NOTE
: All keys pressed on this keypad are sent as if pressed from a wired keypad.
Only use this device for performing the functions recommended in the documentation.
1. From Installer’s Programming, enter Ref #[001305], or scroll to HHK Functions
and press [*].
2. Scroll to the slot number of the handheld keypad you want to program (01-04).
Press [*].
3. Scroll to the number of the function key you want to program (1-4). Press [*].
4. Enter the 2-digit number of the function you want to select, or scroll to the
function you want to assign to that button and press [*]. The following functions
may be programmed:
00 Null Key
05
System Test
01 Stay Arm
06
Quick Exit
02 Away Arm
07
Arm Interior
03 No-Entry Arm
08-15 [*][7] Command Outputs 1-8
04 Chime On/Off
NOTE
: If a programmed function requires access code entry on a hardwired keypad,
it will also require access code entry on a handheld keypad
5. Repeat steps 3 to 4 until all the function keys are programmed.
6. Repeat steps 2 to 5 until all the handheld keypads are programmed.
7. To exit, press [#].
NOTE
: You cannot use the handheld keypad for Silence Fire or Reset Fire Zones
functions.
Now that you have enrolled and programmed all the wireless devices, you will need to test
the devices and mount wireless devices using zones. See section 4 for more information.
I N S T A L L I N G W I R E L E S S D E V I C E S
