1
The PC4164-RS is a wireless signal receiver for use with Maxsys PC4010 and PC4020
v3.0 panels. The PC4164-RS receives signals from WLS9XX wireless devices.
The PC4164-RS has only been investigated for use with the PC4020 by UL.
New features of the PC4164-RS v2.0:
•
Support for the following wireless devices:
smoke detector (WLS906), panic
pendant (WLS908), wireless key (WLS909) and handheld keypad (WLS910)
•
Identification of Wireless Keys (WLS909):
Wireless keys 1 to 16 can be identified
as user numbers 0101 to 0116 (respectively) for identified openings/closings
and command output activation. For more information regarding this feature, see
Section 3.3 “Enroll and Program Wireless Keys.”
•
6 digit serial numbers for all wireless devices:
These new serial numbers
include hexadecimal digits. Please read Section 3.1 “A note on Electronic Serial
Numbers (ESN)” for more information on enrolling older 5-digit and newer 6-digit
devices.
1.1 Before You Begin
This manual describes how to install, program and maintain the PC4164-RS on a
PC4010/4020 Security System. You should have completed the following steps in
your PC4010/4020 installation, before you install the PC4164-RS module:
1. Plan the installation and wiring of the PC4010/4020 system (see PC4010/4020
Installation Manual, Section 2: Installation and Wiring)
2. Install the control panel, and install and enroll at least one keypad to use for
programming (see PC4010/4020 Installation Manual, Section 3: How to Program)
3. Install and enroll any hardwired zone expander modules (PC4108A or PC4116)
you plan to use (see PC4010/4020 Installation Manual, Section 4: Module
Enrollment).
You can program the PC4164-RS from a PC4010/4020 system LCD keypad or using
downloading software on a remote computer. Read your system Installation Manual,
section 3 “How to Program” for more information.
S E C T I O N 1
Introduction
