9XTend™
OEM
RF
Module
–
Product
Manual
v1.2.4
©
2005
MaxStream,
Inc.
Confidential
&
Proprietary
42
Appendix
A:
Agency
Certifications
FCC Certification
The XTend OEM RF Module complies with Part 15 of the FCC rules and regulations. Compliance
with labeling requirements, FCC notices and antenna regulations is required.
Labeling Requirements
In order to inherit MaxStream’s FCC Certification, OEMs and integrators are required to publish
the text shown in Figure A-01 on the final product and within the final product operation manual.
Label Warning
WARNING The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the
final product enclosure that displays the contents shown in the figure below.
Figure
A.1.
Required
FCC
Label
for
OEM
products
containing
the
9XTend
(900
MHz)
OEM
RF
Module
Contains FCC ID: OUR-9XTEND
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Notices
Adherence to the following is required:
IMPORTANT: The XTend OEM RF Modules have been certified by the FCC for use with other products
without any further certification (as per FCC section 2.1091). Changes or modifications not expressly
approved by MaxStream could void the user’s authority to operate the equipment.
IMPORTANT: OEMs must test their final product to comply with unintentional radiators (FCC section
15.107 and 15.109) before declaring compliance of their final product to Part 15 of the FCC Rules.
IMPORTANT: The XTend OEM RF Modules have been certified for fixed base station and mobile
applications. If modules will be used for portable applications, the device must undergo SAR testing.
