21
Operating Instructions
LED Module – Connected Mode
In Connected Mode, the Controller Unit will take command over the LED Modules.
However you must first connect the LED Modules to the Controller Unit.
Connecting LED Modules to the Controller Unit
See the connection diagrams below, and read the additional information to properly connect
the Mazarra LED Lighting System.
A sample connection configuration utilizing 1 Controller Unit.
1.
Each Controller Unit can connect up to 16 LED Modules through wireless
connection.
If you have more than 16 LED Modules, you must use another Controller Unit.
2.
There is a maximum of 16 wireless frequencies.
Therefore you can install up to a maximum of 16 Controller Units in 10 meters (33 feet)
radius. Please refer to “Adjusting Wireless Frequency Channel” section for detail
instructions.
