19
Operating Instructions
The LED Module
Follow the instructions below to operate and program the LED Module.
Note
The LED Module turns on automatically when power is connected, and
turns off when power is cut.
When power is resumed, the LED Module will restore to the previous saved setting
automatically, whether it was last set at Standalone Mode or Connected Mode, and the
intensity level of all the LED channels.
Switching between Standalone and Connected Mode
1.
Press and
hold
Select Button
for 2 seconds to switch between
Standalone Mode
and
Connected Mode
.
2.
Press
Control Dial
to turn on the backlight on the
LCD Display
.
The backlight will turn off automatically after 30 seconds of idling.
LED Module Status
1.
Intensity of the 4 LED channels, temperature of the LED Module and
status of the fan will be shown on the
LCD Display
.
2.
The status of the LED Module will rotate every 5 seconds.
