25
Operating Instructions
The Controller Unit
Follow the instructions below to operate and program the Controller Unit.
Turning on the Controller Unit
1.
The Controller Unit turns on automatically when power is connected,
and turns off when power is cut.
The Controller will remember its previous setting, whether it was last set at Manual Mode
or Automatic Mode.
2.
Press
Backlight Button
on the Controller Unit.
The LCD Panel backlight turns on, and will turn off automatically after 30 seconds of idling.
The backlight will remain lit when the Controller Unit is in the Setup Mode or Connection
Mode.
Entering and leaving Setup Mode
You will need to enter Setup Mode to adjust settings and setup programs.
1.
Press
Mode Switch Button
on the Controller to enter Selection Mode.
The arrow displayed on the LCD Panel will now flash.
2.
Rotate
Control Dial
clockwise to select
Setup Mode
.
3.
Press
Confirm Button
to enter
Setup Mode
.
You are now in the Setup Mode.
4.
When finished, press
Exit Button
to return to
Main Menu
.
The Controller Unit will also return to Main Menu after idling for 10 seconds.
