Maxsine EP3E Series, User Manual

Page: 4 / 40

II
3.
Operations
注意

Before operating the mechanical device, it is necessary to set the parameters with
appropriate values. Otherwise, can cause the mechanical device to out of control or break
down.

Before running the mechanical device, make sure the emergency stop switch can work at
any time.

Performing trial run without load, make sure that the servomotor is in normal operation.
Afterwards joins again the load.

Please do not turn on and off the main power supply more frequently, otherwise can cause
the servo driver overheat.
4.
Running
禁止

Do not touch any moving parts of the mechanical device while the servomotor is running,
otherwise can cause personnel casualty.

Do not touch servo driver and servomotor while the equipment is operating, otherwise can
result in an electric shock or in burn.

Do not move any connection cables while the equipment is operating, otherwise can result
in physical injure or equipment damage.
5.
Maintenance and inspection
禁止

Do not touch any portion inside of the servo driver and servomotor, otherwise can cause
an electric shock.

Do not remove the front cover of the servo driver while power is on, otherwise can cause
an electric shock.

Please wait at least 5 minutes after power has been removed before touching any terminal,
otherwise the remaining high voltage possibly can cause an electric shock

Do not change the wiring while the power is on, otherwise can cause an electric shock.

Do not disassemble the servomotor, otherwise can cause an electric shock.