7
GB
10.Side support bar
11.Table fence
12.Bevel angle scale.
13.Bevel angle scale pointer.
14.Dust bag
15.On/O
ff
Switch
16.Dust bag connector.
17.Locking bolt
18.Bevel lever handle
19.Rear support
20.Working clamp
21. Upper handle
22. Allen key
23. Saw sha
ft lock
24. Upper guard
25. Cover plate
1.Rear support ( Fig 1,2 )
The rear support (19) are under the base (6).
Deploy the rear support and (19) engage them correctly into the clips (19a) provided at the bo
tt
om plate of
the machine.
2.W
orking position.( Fig 3,4,5)
Low
er the handle (1) and pull the locking bolt (17) out of its locking position.
-When the locking bolt (17) is unlock
ed, the handle (1) will lift au
toma
tic
to the ma
ximum upper position
Guide the handle while it lift
t
o the upper position.
-A
ft
er each job lock the machine in the tr
ansport position b
efore store the machine.
Press the handle (1) slo
wly till it
reach the lowes
t position, p
ress the locking bolt (17) and slowly guide the
handle (1) in upwards dir
ection till the lock
by the locking bolt (17)
3.Support ba
r. (Fig 6+7)
-Loosen the locking bolts (10a) position on the base (6)
-Insert the end of the support (10) into the holes at the base (6)
Tighten the locking bolts (10a)
4.In
stall work piece clamp (Fig. 8)
The work piece clamp (20) can be mounted at both side of the base.
Note : If the mitre or bevel angle is adjusted and the motor housing will swing to the le
ft side,
you can
mount the work piece clamp at the right side.
-Loosen the locking bolts (20a) located at the support bar (20b)
-Insert the work piece clamp (20f) at the holes of the support bar (20b)
-If the w
ork piece clamp is positioned
correctly
, tig
hten the locking bolts (20a)
5.Du
st c
ollection bag.(Fig 9 )
Squeeze the metal clamp (19a) at the dust c
ollection bag (19) and m
ove it over the dust c
onnection (21)
6.In
stall of a sta
tiona
ry machine (Fig. 10)
This machine is used as a sta
tiona
ry machine only, Never use this machine as a mobile tool.
Summary of Contents for MPBMS255L
Page 2: ......
Page 3: ......
Page 36: ...33 RU 33 36 36 36 37 37 38 41 42 43 43 43 43 II 2...
Page 37: ...34 RU 1 2...