10
Chapter 2 General Safety Information
WARNING:
◎
Use of controls or adjustments or performance of procedures other than those
set forth in this User's Guide and related documents may result in hazardous
radiation exposure.
4
、
Electrical Operating Instructions
MFSQ QCW Fiber Laser Series module supply voltage:220VAC:
WARNING:
◎
Make sure the shell of this equipment is properly grounded. Any interruption
of the ground loop may result in personal injury.
◎
Make sure that the input DC voltage of the laser is the voltage of the normal
DC mains, and wires are connected accurately. Any incorrect wiring method may
cause damage to people or instrument.
◎
Before supplying the power to the device, make sure that the correct voltage
of the DC power source is used. Failure to use the correct voltage could cause
damage to the device.
◎
No operator serviceable parts inside. Refer all servicing to qualified
Maxphotonics personnel.
◎
To prevent short circuit, do not remove shell, detach the laser without
permission and damage the relevant signs. Any product with unauthorized
dismounting shall not be subject to warranty.
Cable color
Circuit connection
Brown
L
Blue
N
Kelly
Laser Shell
