Maxon SP-1102, Service Manual, Page: 17 / 35

Service Manual SP - 1402
Page 17 of 35
Disassembly and Re-assembly of the Radio
In order to carry out the following test and alignment procedures it will be necessary to gain
access to the inside of the radio.
Care should be exercised when opening up the radio for maintenance or repair.
Removing and replacing the main cover
a) Turn the radio over, so that the radio is upside down.
b) Remove the ANT and volume knob.
b) Remove the two holding screws.
c) Lift the cover off.
d) Replace the main cover by reversing the above procedure.