Maxon SL100K, User Manual

Page: 8 / 73

PREPARING FOR USE
UNPACKING AND INSPECTION
Unpack the radio and check that you have received the
following items:
· SL100K hand-portable radio
· Battery pack
· Antenna
· Belt clip
If any of these items are missing, please contact your
Reseller.
FITTING INSTRUCTIONS
ATTACHING AND REMOVING THE ANTENNA
A high quality matched antenna is supplied with the SL100K
radio. Install the antenna by turning clockwise into the
antenna socket à on the top of the radio, until it is firmly
seated. Do not over tighten. To remove the antenna, reverse
the above procedure.
Never operate the radio without the antenna fitted.
Always use a Maxon approved antenna.
ATTACHING AND REMOVING THE BATTERY
(See Fig. 1)
To attach the battery pack, hold the radio face down in your
hand and position the guides of the battery in line with the
radio guide rails. Slide the battery upward until a click is
heard.
To remove the battery pack, hold the radio face down in your
hand and push the battery latch button located in the upper
right hand corner of the battery pack. Hold the battery latch
button down, and slide the radio battery in a downward
direction.
Gently lift the battery pack away from the base of radio when
it is free from radio guide rails.
ATTACHING AND REMOVING THE BELT CLIP
To attach the clip, hold the radio face down in your hand.
Locate the slot in the belt clip and align with holder on upper
left-hand corner of the radio back. Push upward on belt clip
until a click is heard. To remove the clip, push and hold the
release button located at the top of the belt clip. Slide the
clip away from the belt clip holder.
ENGLISH
6